GTECHNIQ CRYSTAL SERUM LIGHT 30ML
Sale!
GTECHNIQ CRYSTAL SERUM LIGHT 30ML
| Gtechniq Crystal Serum Light, also known by the acronym CSL, is a long-lasting ceramic treatment. It is the accessible version of the famous Crystal Serum ceramic used by accredited professionals in the Gtechniq network. This Light version is more permissive and therefore more suitable for amateurs/experienced enthusiasts. Indeed, the treatment can be removed if necessary after a simple polishing, unlike the pro version which will require sanding. Nevertheless, the Crystal Serum Light offers 80% of the performance of the professional version. As far as the addition of shine is concerned, there is no difference between the 2 versions. In terms of durability, the treatment will protect your vehicle for 2 to 3 years depending on maintenance and use. Finally, Crystal Serum Light offers good resistance to harsh chemicals (pH 2-12), a soft touch and a strong water-repellent effect. Once protected, cleaning your vehicle will be a simple formality:) |
| Use 1. Degrease the surface to be protected beforehand with the Panel Wipe. 2. Place the equibalent of 2 pipettes (supplied) of Crystal Serum Light on the application pad. 3. Cap the bottle and put it down (do not keep it in your hand to avoid heating it up, as this may prematurely accelerate its curing). 4. Apply to the vehicle in areas of up to 60x60cm. 5. Wipe it after 2-3 minutes with moderate pressure (it is recommended to use 2 different microfibers to make sure you don’t forget to wipe an area). 6. Fold your wiping microfiber regularly to use the different sides. 7. Allow the Crystal Serum Light to bond to the polish for at least 12 hours (ideally 24 hours) without contact with water. 8. Do not wash the vehicle for 1 week. Important Always work in the shade, on a cold surface and do not let the product dry. Don’t forget to wear your protective equipment: nitrile gloves and mask. Use the appropriate lighting or you will miss a trace when wiping. Once wiping is complete, rinse your microfibers immediately so that the C1 does not crystallize in the fiber. It is nevertheless recommended to use these microf1bers for a different purpose than wiping the bodywork. |