SATIN BLACK

A very high quality multi purpose spray paint with a durable finish. These aerosols give a very even and fine spray for a really good
coverage. Suitable for most plastics, wood, fibreglass and body filler.
To Prepare Surface
Remove flaky paint and rust with a wire brush.
Smooth off with wet and dry.
Ensure surface is dry and free from oil and grease
To Prime Surface
Apply two coats of grey primer
Allow to dry for two hours
Smooth with fine wet and dry
To Paint Surface
Shake can for 3 minutes
Hold can 10 – 15 inches from surface
Spray using using smooth, even strokes
Leave until touch dry before applying further coats
Do not over spray
Caution
Pressurised container
Protect from sunlight
Do not expose to temperatures exceeding 50 degrees celsius
Do not pierce or burn even after use
Do not spray onto a naked flame or incandescent material
Safety Information:
Irritating to eyes.
Repeated exposure may cause skin dryness or cracking.
Vapours may cause drowsiness and dizziness
Keep out of reach of reach of children.
Keep away from sources of ignition – NO SMOKING.
Do not breathe vapour/spray.
In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice
Wear suitable gloves
Use only in well ventilated areas